How effective is floor soundproofing?

Floor soundproofing will reduce impact noise, airborne noise, or both. All our acoustic floor solutions are designed to exceed the UK Part E Building Regulations for the passage of sound. Different systems offer different levels of noise reduction depending on the level of noise needed to be blocked, the current construction of the floor and final floor finish. No soundproofing will offer 100% reduction, however installing soundproofing will dramatically reduce noisy neighbour noise. *dB results will vary depending on several factors. Please see our dB blog on why dB results may vary

Does floor soundproofing work both ways?

Floor soundproofing will block impact noise (footsteps) travelling from the room above to the room below. Floor soundproofing can also block airborne noise travelling from below to the room above or from the room above to the room below.

Do I need to soundproof the whole floor?

The short answer is YES as soundproofing is like waterproofing and is only as good as the weakest point. (As sound can travel through very small gaps). If you were to soundproof just part of the floor you would be wasting your money.

How thick is floor Soundproofing?

Floor soundproofing varies in thickness from 5mm to 28mm depending on the type and level of soundproofing required. However, our best-selling Reverso SoundMat at only 18mm thick performs exceptionally well against both airborne and impact noise. Its unique built in stabilising layer also means that in most cases hard floor finishes can be installed directly on top, minimising any further floor height build-up.

Do you offer an installation service?

There are two main options for installing our DIY soundproofing solutions: DIY Installation All of our systems have been designed to be DIYable - saving you any unnecessary installation expense 80% of customers install the systems themselves - we've made DIY installation an easy option We supply simple and comprehensive step-by-step installation guides and videos - for fuss free installation Our technical team are on hand to answer any questions and provide installation support - we're here every step of the way Using a local tradesperson You're well on your way to noise free living. If installing the system yourself isn't an option, then simply use a local tradesperson We take away any stress of installation by speaking directly to your tradesperson throughout the process

Once installed, can I put any type of flooring down?

The Reverso SoundMat is suitable for most final floor finishes. For installation of different floor finishes please see the Reverso SoundMat Installation guide.

Reverso SoundMat 18mm

ProSound Reverso SoundMat

Uniquely designed soundproofing, for peaceful modern living

Buy Now

ProSound Reverso SoundMat

Uniquely designed for peaceful modern living

Buy Now

58 dB

Impact noise performance

See performance tabs below

51 dB

Airborne noise performance

See performance tabs below

Reversible

Suitable for hard or soft floor finishes

18mm thick

Minimise floor height build up

No Underlay Required

Acts as a premium carpet underlay

No Over Boarding

Provides a stable base for most final floor finishes

ProSound™ Reverso SoundMat™

The Reverso SoundMat is a totally unique and specially engineered dual purpose soundproofing mat suitable for both hard or soft floor finishes. A slim and effective floor soundproofing solution designed to reduce unwanted impact and airborne noise, helping you achieve peace and quiet in your home.

Different soundproofing layers of mass coupled with an impact dampening layer are cleverly combined in one easy to install product which greatly improves the soundproofing capabilities of timber floors.

The built in stabilising layer makes the Reverso SoundMat particularly suited to hard floor final finishes, as the majority of all hard floor finishes can be installed on top. This removes the need of a stabilising layer, which reduces time and costs.

Whether you require peace and quiet from noisy neighbours living above or below, or privacy between floors within your own home, then the Reverso SoundMat is an excellent solution.

Download Brochure

Why Use The Reverso SoundMat?

High performance - improve the soundproofing capabilities of your floor to achieve peace, quiet and privacy within your own home

Straightforward DIY installation - saving you time and money, without the need of extra labour costs

Saves you space - minimise the build up of floor height with a high performing, slim SoundMat (only 18mm thick)

Fast delivery lead times (3-5 working days) - no need to prolong the wait for a solution to your noise issue. We're here to make it happen swiftly and efficiently

Industry leading technical support - Soundproof with confidence. Whatever the noise issue, whatever the question, we're here to help

Simple, DIY Installation

The Reverso SoundMat has been designed as a direct to floor solution which means it is extremely straightforward to install.

A competent DIYer can install the system themselves saving on installation costs. For non DIYers, a local tradesperson or carpet fitter will have the necessary skill to install the system for you following our detailed installation guide.

Our team of highly trained and experienced soundproofing professionals are also on hand to offer technical support and answer any installation questions.

Installation Guide

Simple

DIY Installation

Technical Information

Three layers of soundproofing in one unique product

1. 6mm Fibre Cement Board - adds more mass to the floor to help block airborne noise. Whilst also providing a flat stable base for most hard floor final finishes such as, laminate, vinyl, wood and tiles

2. 9mm Closed Cell Foam - dampens sound energy and vibrations

3. 3mm Mass Loaded Vinyl - a second layer of high mass to further block airborne noise

Download Brochure

Real World Site Test

Tested on timber sub floor with one layer of plasterboard directly fixed to underside of joists.

Airborne Performance

(higher the figure the better)

51dB (DnT,w)

43dB (DnT,w+Ctr) Includes correction for low frequency performance.

Airborne sound reduction of untreated timber floor:

38dB (DnT,w) / 25dB (DnT,w+Ctr)

Airborne improvement with treatment:

13dB (DnT,w) / 18dB (DnT,w+Ctr)

Impact Performance

(Lower the figure the better)

58dB (LnT,w)

Impact sound reduction of untreated timber floor:

82dB (LnT,w)

Impact improvement with treatment:

24dB (LnT,w)

See All Performance Data

Real World Site Test

Tested on timber sub floor with one layer of plasterboard directly fixed to underside of joists.

Airborne Performance

(higher the figure the better)

51dB (DnT,w)

43dB (DnT,w+Ctr) Includes correction for low frequency performance.

Airborne sound reduction of untreated timber floor:

38dB (DnT,w) / 25dB (DnT,w+Ctr)

Airborne improvement with treatment:

13dB (DnT,w) / 18dB (DnT,w+Ctr)

Impact Performance

(Lower the figure the better)

51dB (LnT,w)

Impact sound reduction of untreated timber floor:

82dB (LnT,w)

Impact improvement with treatment:

31dB (LnT,w)

See All Performance Data

Specifications

Total thickness of system: 18mm
Size: 1200mm x 600mm x 18mm (0.72m²)
Weight: 12.60kg per mat (17.50kg per m²)
Water: Resistant

Thermal Conductivity:

6mm Fibre Cement Board: 0.35 W/mK
MLV: 0.037 W/mK
9mm Closed Cell Foam: 0.039 W/mK

Thermal Resistance:

6mm Fibre Cement Board: 0.17 m² K/W
MLV: 0.095 m² K/W
9mm Closed Cell Foam: 0.23 m² K/W

Fire:

6mm Fibre Cement Board: EN 13501-1: A1
MLV: Surface spread of flame is tested to ISO 3795 and FMVSS 302 - Self Extinguishing
9mm Closed Cell Foam: FMVSS 302

Download Brochure

Full System Components:

Acoustic Sealant - 900ml

Jumbo Sealant Applicator Gun for 900ml tubes

High Tack Tape - 33m x 50mm

9mm Gripper Rod Soundproofing Riser - 1.2m (for carpets)

Perimeter Flanking Strip (25m x 100mm x 5mm)

Acoustic Mineral Wool

Plasterboard Scrim Tape -90m

Bond-it Tile Adhesive 1.5kg

125mm Tile Adhesive Combi Spreader

Buy Now

Ready To Take The Next Step?

If you know what you want and are ready to proceed

Buy Now

If you need help calculating material quantities

Need some guidance? Speak to our friendly team of experts

We don’t expect you to become an overnight soundproofing expert, that’s what we’re here for.

Floor Soundproofing FAQs

How effective is floor soundproofing?

Floor soundproofing will reduce impact noise, airborne noise, or both. All our acoustic floor solutions are designed to exceed the UK Part E Building Regulations for the passage of sound.
Different systems offer different levels of noise reduction depending on the level of noise needed to be blocked, the current construction of the floor and final floor finish.
No soundproofing will offer 100% reduction, however installing soundproofing will dramatically reduce noisy neighbour noise.
*dB results will vary depending on several factors.
Please see our dB blog on why dB results may vary
Does floor soundproofing work both ways?

Floor soundproofing will block impact noise (footsteps) travelling from the room above to the room below.
Floor soundproofing can also block airborne noise travelling from below to the room above or from the room above to the room below.
Do I need to soundproof the whole floor?

The short answer is YES as soundproofing is like waterproofing and is only as good as the weakest point. (As sound can travel through very small gaps).
If you were to soundproof just part of the floor you would be wasting your money.
How thick is floor Soundproofing?

Floor soundproofing varies in thickness from 5mm to 28mm depending on the type and level of soundproofing required. However, our best-selling Reverso SoundMat at only 18mm thick performs exceptionally well against both airborne and impact noise.
Its unique built in stabilising layer also means that in most cases hard floor finishes can be installed directly on top, minimising any further floor height build-up.
Do you offer an installation service?
There are two main options for installing our DIY soundproofing solutions:

DIY Installation
- All of our systems have been designed to be DIYable - saving you any unnecessary installation expense
- 80% of customers install the systems themselves - we've made DIY installation an easy option
- We supply simple and comprehensive step-by-step installation guides and videos - for fuss free installation
- Our technical team are on hand to answer any questions and provide installation support - we're here every step of the way
Using a local tradesperson
- You're well on your way to noise free living. If installing the system yourself isn't an option, then simply use a local tradesperson
- We take away any stress of installation by speaking directly to your tradesperson throughout the process
Once installed, can I put any type of flooring down?

The Reverso SoundMat is suitable for most final floor finishes. For installation of different floor finishes please see the Reverso SoundMat Installation guide.